Zeus 35.11 GD

Zeus 35.11 GD

The ZEUS GD range consists of powerful and compact telehandlers, designed to give the user the right balance between power and agility, wherever it is necessary to handle heavy loads in confined spaces, in either the construction or agriculture sectors.

ZEUS 35.11 GD

Is equipped with hydrostatic transmission combined with pedal “INCHING” command, that allows the vehicle to run at slow speed also with engine at full throttle. It is particularly suitable for loading and unloading materials, thanks to its swing kinematic mechanism equipped with counter-lever, which allows to considerably increase the rotation angle of the fork carrier plate. The extension cylinder located inside the boom also improves visibility and safety in use.
The cab, ROPS-FOPS approved, equipped with every safety device and designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. To further enhance comfort, new seats with automatic suspension can be installed on request.

The needs on construction sites are changing management costs must be reduced, the vehicles productivity must be continuously improved.
And Dieci meets the new demands of its customers, with more versatile, more robust, more reliable vehicles easy and intuitive to drive and operate.
Maintenance is very easy thanks to durable components and materials that require replacement after several hundred hours of use.
Modern vehicle, even in the lines, with the new Giugiaro Design cab enriched with materials derived from Truck and Automotive sectors that enhance its interiors. The ZEUS range consists of multi-purpose and compact telehandlers, designed to offer the user the right balance between power and agility wherever it is necessary to handle heavy loads in confined spaces.
With lifting heights from 8 to 13 m and load capacities from 3.5 to 4 tons, the Zeus telehandlers have been completely redesigned to reduce operating costs with a focus on fuel consumption and emissions.
The high safety standard is guaranteed by the proportional control outriggers, standard on 11- and 13-meter models, and by the transversal leveling device available on the whole family.

DIECI TELEMATIC SYSTEM

The DTS is the innovative system that allows to interact with the vehicle remotely to monitor its operating parameters, measure its performance and limit its use.

Operational data, collected via the cloud, allows routine maintenance cycles to be monitoredoptimizing costs and maintaining high vehicle and fleet efficiency.

Vehicle and operators protected from theft and accidents thanks to the geolocation function.

EASY AND INTUITIVE

All boom movements are controlled by a single-lever joystick, which also incorporates the direction selector (reverse shuttle – FNR) for intuitive and comfortable control.

Dashboard with clear instrument panel and well-distributed controls.

All vehicle control functions are handled by a single control unit that measures the best working parameters through an advanced diagnostic system.

The two Load Sensing – Flow Sharing hydraulic technologies ensure more simultaneous movements and greater response to controls, for more effective work.

VERSATILE AND FLEXIBLE

The Dieci telehandlers have been designed to use the various equipment needed to carry out all the work required by a construction site: forks, loaders, lifting hooks, jibs with winches, grippers, material baskets, mixing buckets, concrete ladles, sweepers, salt spreader, snowplow blades.

Automatic equipment recognition: the vehicle configures itself automatically recognizing the equipment attached.

MAXIMUM CAPACITY

7700 LBS

MAXIMUM LIFTING HEIGHT

34,8 ft

MAXIMUM POWER

73 hp

AVAILABLE DOCUMENTS

Height from ground
14.2 inch
Maximum length
210.6 INCH
Cab height
94.9 inch
Tire width
90.2 inch
Wheels curve radius
144.3 in
Maximum capacity
7700 LBS
Maximum lifting height
34,8 ft
Maximum height on wheels
34,8 ft
Pull-out force
18434 lbf
Towing force
18659 LBF
Maximum speed
18.6 MPH
Unladen weight
18078 lb
Brand
Kubota
Fueling
diesel
Displacement
203 in³
Nominal Power
73 hp
Rpm per nominal power
2600 rpm
Emission standard
Stage V / Tier 4F
Hydraulic pump capacity
33.5 GAL/MIN
Maximum operating pressure
3771 psi
Transmission type
Hydrostatic with variable Displacement pump
Standard tires
405/70x24"